How it Works
How does the Spinning
®
computer work?
The Spinning
®
computer displays heart rate, RPM (speed), total distance and elapsed time.
• The heart rate (HR) information is received from an Ant+ or Polar
®
compatible heart rate strap worn by
the person riding the Spinning
®
Bike. The HR strap sends a radio signal to the computer and the computer
displays the person’s heart rate. If any other strap is used it will not display the heart rate. The computer and
heart rate strap must be within range of each other and no other heart rate strap can be within this imaginary
circle. The range is approximately 25”- 30” (63 cm - 76 cm) from the computer.
•The RPM signal is transmitted by the cadence sensor sending the RPM to the computer. Each time the
magnet on the flywheel passes the cadence sensor it records one revolution and sends this number to
the computer.
6
RPM Heart Rate
To Next Page
Loading...
