User manual
Light and sound indication
The security complex provides various options for indicating modes such as "Disarmed", "Armed",
and "Alarm":
Hidden: Light and sound indicators are disabled.
Silent: Only light indicators are enabled.
Sound: Only sound indicators are enabled.
Full: Both light and sound indicators are enabled.
Indicator table
The security complex informs about its status by means of sound (horn) and light signals (turn
signals):
icon-short.png
Image not found or type unknown
— short signal;
icon-long.png
Image not found or type unknown
— long signal.
Event Light signals Horn
Security activation
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
Security activation with security zone
breach
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
Security deactivation
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
Security deactivation (one of the
zones was violated in the security
cycle)
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
icon-short.png
Image not found or type unknown
Alarm 30 s 30 s
The default setting includes sound notifications with sirens and emergency light signals. The
indicator mode is configured by the installation specialist during complex setup.
To Next Page
Loading...