If any of these zones are breached, the system will switch to "Alarm" mode.
Arming can be activated in one of the following ways:
Short press on button
icon-short-1.png
Image not found or type unknown
of the remote key;
When the tag is lost or the door handle sensor is touched in "Hands-Free" mode
By pressing the tag button once in "Disarmed" or "Alarm" mode
Successful arming will be confirmed by 1 sound signal and 1 light signal.
Silent Arming
Silent arming, which does not use sound signals (siren), can be performed by triple press on button
icon-short-1.png
Image not found or type unknown
of the remote key;
Successful arming will be confirmed by 1 light signal.
Emergency Arming
If the tag or remote key battery is dead, and there is no access to thestarline.online personal
account and StarLine mobile app, use emergency arming:
1. Press the service button or the transceiver button 3 times.
2. Turn on the ignition. Three sound signals will follow.
3. Check for two short sound signals.
4. Turn off the ignition.
5. Exit the vehicle and close all doors.
Arming is only possible with the ignition off. If the arming command is sent while the ignition
is on, only the central lock will be activated.
If the doors, hood, or trunk are not properly closed, or if any of the door, hood, or trunk
switches are faulty (permanently closed), the system will warn you with 4 sound signals and
4 light signals. Restore the breached security zone and check for a single confirming signal
indicating entry into the armed mode.
If the doors, hood, or trunk are not properly closed, or if any of the door, hood, or trunk
switches are faulty (permanently closed), the system will warn you with 4 light signals.
Restore the breached security zone and check for a single confirming signal indicating entry
into the armed mode.
To Next Page
Loading...