Starline A90 - Cursor Menu

Activate/deactivate service mode
icon-service-mode.png
Image not found or type unknown
or cursor menu
Activate/deactivate "Hands-Free" mode cursor menu
Activate/deactivate button lock
icon-short-double-2-3.png
Image not found or type unknown
Activate/deactivate "Button Autolock" function
icon-long-double-1-4.png
Image not found or type unknown
icon-note-2.png
Image not found or type unknown
Activate only remote key vibration signal
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-3.png
Image not found or type unknown
Activate sound profile "SOUND 2"
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-1.png
Image not found or type unknown
Activate sound profile "SOUND 1"
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-2.png
Image not found or type unknown
Activate sound profile "SOUND 0"
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-3.png
Image not found or type unknown
Activate sound profile "SOUND --"
icon-long-3.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
icon-short-4.png
Image not found or type unknown
Launch flexible logic program
icon-short-3.png
Image not found or type unknown
icon-short-3.png
Image not found or type unknown
Cursor Menu
Some functions of the security complex are controlled through a cursor menu: control of the
"Hands-Free" mode, service mode, setting the automatic engine start.
Entering and exiting the menu is done by long-pressing button 4:
icon-long-4.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
. If no buttons on the remote key are pressed within 15 seconds, there will be
an automatic exit from the menu. When entering the menu, the cursor will be set to the first icon.
Transition to the next and previous menu items is done by short pressing buttons
icon-short-1.png
Image not found or type unknown
or
icon-short-4.png
Image not found or type unknown
, respectively.
Selecting a function is done by short pressing buttons 2 and 3:
icon-short-double-2-3.png
Image not found or type unknown
.
Changing the parameter value is done by short pressing buttons
icon-short-2.png
Image not found or type unknown
or
icon-short-3.png
Image not found or type unknown
(decrease and increase, respectively). Holding the button for a long time
increases the speed of changing the parameter value.