Starline A90 - Settings Menu

Transitions between menu items, changing parameters, and exiting the menu will be confirmed by
a melodic sound signal.
Descriptions and management of settings are provided in the table.
Icon Parameter Description Setting Step
Режим «Свободные руки».png
Image not found or type unknown
"Hands-Free" mode Enable/disable "Hands-
Free" mode
—
Включен автоматическии запуск по будильнику.jpg
Image not found or type unknown
Automatic engine start and
preheater start by alarm
clock
Set the hours and minutes
for engine start.
Switching between engine
and preheater start settings
is done by short pressing
buttons
1_2.png
Image not found or type unknown
and
3_4.png
Image not found or type unknown
on the remote
key.
When setting the engine
start, the screen will display
the digit "1", for preheater
start — the digit "2".
1 minute
Включен автоматическии периодическии запуск.jpg
Image not found or type unknown
Automatic start by timer Set the frequency of engine
start in hours
1 hour
Включен автоматическии запуск по температуре.png
Image not found or type unknown
Automatic start by
temperature
Set the temperature value
in degrees Celsius
1ºС
Включен автоматическии запуск по падению напряжения АКБ.png
Image not found or type unknown
Automatic start by voltage Set the battery voltage
value in Volts
0.1 V
Сервисныи режим.png
Image not found or type unknown
Service mode Enable/disable service
mode
—
Settings Menu
The settings menu is intended for configuring the complex operation parameters.
Entering and exiting the settings menu is done by long-pressing button 4:
icon-long-4.png
Image not found or type unknown
icon-note-2.png
Image not found or type unknown
. After entering the menu, the current state of the complex settings will
appear on the remote key screen:
image.png
Image not found or type unknown
image.png
Image not found or type unknown
image.png
Image not found or type unknown
1 — parameter value;
2 — parameter number.
Transition to menu items is done by short pressing buttons
icon-short-1.png
Image not found or type unknown
or
icon-short-4.png
Image not found or type unknown
, to the previous and next item, respectively.
Decreasing and increasing the parameter value is done by short pressing buttons