Disarmed Mode
Disarming can be performed in one of the following ways:
Short press on button
icon-short-2.png
Image not found or type unknown
of the remote key;
Upon detection of the tag or touching the door handle sensor ("Hands-Free" mode)
By pressing the tag button once in "Armed" mode
Successful disarming will be confirmed by 2 sound signals and 2 light signals. If the "Alarm" mode
was activated during the armed state, 3 sound signals and 3 light signals will follow.
After disarming, all events that occurred during the armed state will be displayed on the remote
key screen.
Silent Disarming
Silent disarming, which does not use sound signals (siren), can be performed by triple press on
button
icon-short-2.png
Image not found or type unknown
of the remote key;
Successful silent disarming will be confirmed by 2 light signals. If the "Alarm" mode was activated
during the armed state, 3 light signals will follow.
After disarming, all events that occurred during the armed state will be displayed on the remote
key screen.
Central Locking During Travel Function
This function is designed for automatically locking the central locking system during a trip based on
one of the configurable conditions:
When the ignition is turned on
When the vehicle starts moving and the brake pedal is pressed
When the handbrake is released
When the gear selector is shifted from the "Park" position for vehicles with automatic
transmission
When the set speed threshold is exceeded
If no actions are taken within 30 seconds after disarming, the system will automatically
switch to "Armed" mode and lock the central locking system.
If no actions are taken within 30 seconds after disarming, the system will automatically
switch to "Armed" mode and lock the central locking system.
To Next Page
Loading...