Central Lock Unlocking During Travel
Function
This function is designed for automatically unlocking the central locking system during a trip based
on one of the configurable conditions:
When the ignition is turned off
When the gear selector is shifted to the "Park" position for vehicles with automatic
transmission
When the engine is stopped
When the ignition is turned off or the gear selector is shifted to the "Park" position for
vehicles with automatic transmission
When the handbrake is engaged
Trunk Unlocking in Armed Mode Function
This function allows the trunk to be opened with the standard vehicle remote key without
disarming the system, provided that the tag and/or the system's remote key is within range.
Keyless Entry System Lock Function
The "Keyless Entry System Lock" function provides an additional level of protection against theft in
case the standard vehicle key is stolen. In the "Armed" mode, the system blocks the operation of
the keyless entry system when the tag is out of range.
Enabling, disabling, and configuring the "Central Locking During Travel" function is
performed by an installation specialist.
Enabling, disabling, and configuring the "Central Lock Unlocking During Travel" function is
performed by an installation specialist.
Enabling, disabling, and configuring the "Trunk Unlocking in Armed Mode" function is
performed by the installation specialist during setup.
To use this function, tag authorization must be enabled.
To Next Page
Loading...