Use this mode when parking in areas with a high risk of theft. In this mode the system will require
owner authorization with the factory buttons each time the system is disarmed.
To enable/disable the mode, follow these steps:
1. Disarm the alarm.
2. Turn off the ignition.
3. Press the service button twice.
4. Turn on the ignition. Two audible signals will follow.
Enabling the mode will be confirmed by one audible signal and one visual signal, while disabling it
will be confirmed by two audible and two visual signals.
This mode operates independently of the "Immobilizer mode" settings.
To Next Page
Loading...