User manual
Changing the emergency
disarm code
The initial emergency disarm code is indicated on the owner's plastic card or PIN envelope included
in the delivery set.
PIN envelope
pinEnvelope.jpg
Image not found or type unknown
Changing the emergency disarm code via
the service button
To change the emergency disarmament code using the service button, you need to first enter the
current code and then the new code twice:
1. Put the system in the "Disarmed" mode.
2. Press the service button 4 times.
3. Turn on the ignition. Confirm the action by observing 4 flashes of the service button LED
and 4 sound signals.
4. The system's transition to the emergency disarm code change mode will be confirmed by
2 short flashes of the service button LED and 2 sound signals.
If there is no activity within 5 seconds, the system will automatically exit the
emergency disarm code change mode.
5. Turn off the ignition.
6. Turn on the ignition and press the service button a number of times corresponding to the
first digit of the current emergency disarm code.
7. Turn off the ignition. The service button LED will light up, and the number of flashes will
correspond to the digit position of the emergency disarm code (1, 2, 3, or 4 times).
To change the code, you need to know the current emergency disarm code.
The emergency disarm code may contain any digits except zero.
To Next Page
Loading...