Resetting sound profile to factory default settings
1. Select the necessary sound profile with corresponding buttons combination.
2. Enter sounds profile menu with long pushing level 2
3. Hold 3 button until next sound signal .
Setting sounds tone
The sounds tone can be also setup in sounds profile menu.
1. Enter to sounds profile menu with long pushing level 2
2. Push buttons shortly. The current sounds tone BP-1 or BP-2 shall be
displayed. BP-1 tone is set as default.
3. Push buttons shortly to select next tone.
Sounds tone menu is automatically exited in 10 sec if no any buttons pushed.
Buttons auto lock
The option lock buttons automatically each time after backlit off.
It is enabled and disabled with long push level 2.
Remote key searching
Push and hold service (valet) button for 5 sec – remote key shall beep.
25
To Next Page
Loading...
