Starline S9 - Parking Heater Control

! Learn ignition takeover support and particular procedure from your StarLine installer.
Parking heater (preheater) control
This feature lets warm up engine and/ or interior before a trip with remote and automatic
activating parking heater and auxiliary heater.
Parking heater can be started manually in following ways:
 sequential pushing remote key buttons
 SMS text command 221
 command from StarLine mobile app
 command from starline.online personal account
Default parking heater run time at manual activation is 20 min and can be adjusted in
system configuration.
! Factory and optional parking heater may have embedded primary factory settings, differ
from those configured in system settings.
Parking heater run time can be extended with sending repeated activation command.
Parking heater can be stopped manually in following ways:
 sequential pushing remote key buttons
 SMS text command 220
 command from StarLine mobile app
 command from starline.online personal account
Parking heater can be automatically started before remote and automatic engine start on
events and terms set in system configuration.
Parking heater can be started automatically in following terms:
 by engine temperature – parking heater is started when engine temperature is
below the set value
 by timer – parking heater is started at a set time
Temperature and time for parking heater activation can be set in:
 remote key operation mode menu
 StarLine mobile appliance
 starline.online personal account
Parking heater is stopped when the set engine start temperature (for automatic engine
start) or the set parking heater run time is reached and engine will be started then.
Default parking heater automatic run time is set on 20 min. It can be extended by sending
34