Video recorder (dashcam) control
! The option must be initially wired and programmed while installation.
System shall automatically switch dashcam On to begin recording:
• at ignition switched On – dashcam is activated for 5 min;
• at full alarm or warn alarm triggered – dashcam is activated for 2 min;
• with SMS command 69 dashcam is activated for 5 min.
! If engine is still running in armed mode then dashcam continues operating until engine is
stopped.
Risky parking
This mode can be used in places with high probability of theft and robbery. In Risky
parking mode system shall require owner authorization with factory buttons at every
switching ignition On in disarmed mode. This mode operates regardless immobilizer mode
settings made in systems configuration.
Risky parking activation:
1. Disarm security system
2. Switch ignition Off
3. Push service button or external transceiver button twice
4. Switch ignition On. Double sounds shall follow.
Risky parking activation is confirmed with 1 sound and flash, deactivation – with double
sounds and flashes.
Cellular control commands
System can be controlled with voice and SMS text commands from the owner master
phone number (M1) and additional registered numbers (M2, M3, M4).
The first incoming call telephone number shall be automatically recorded as M1 master
number. All commands received from M1 number are executed without a GSM PIN code
in default configuration. PIN code is recorded by owner at initial call from M1 number.
Commands from M2...M4 numbers are executed with PIN code in the beginning.
i.e. system arming command: 1234 11; where 1234 – PIN code, 11 – arming command
number.
Voice call commands
Command Function М1
М2,
М3,
М4
Guest
phones
0 Listen commands menu
36
To Next Page
Loading...
