2. Switch ignition Off if it is On
3. Push service button 7 times
4. Switch ignition On. 7 LED flashes and 7 beep sounds shall follow.
5. Entry into registration mode will be confirmed with 2 LED flashes and 2 sounds.
6. Push service button 3 times.
7. Wait for the long LED light up confirming existing authorization that PIN code has been
deleted.
8. Switch ignition Off.
9. Exit from registration mode will be confirmed with 2 LED flashed and 2 beep sounds.
Emergency disarming
System can be fully disarmed with emergency disarm code, indicated on owner ID card,
when:
49
To Next Page
Loading...
