If authorization is not passed within 1 min, then engine will be stopped at a drive attempt
for 1 min or until successful authorization passed.
Remote engine start
The feature allows to make remote and automatic engine start and stop to warm up or cool
down vehicle interior to a comfortable temperature and warm up engine before a trip.
Preparation of a car with manual transmission for remote and automatic engine
starting.
If vehicle is equipped with manual transmission, then system must be set to “Program
neutral” state to prepare for further remote or automatic engine start in following
procedure:
tighten parking brake with engine running
remove key from ignition barrel (or push PTS button if applicable), engine continues
running, service button LED will light up permanently
leave vehicle, shut doors, hood, trunk and arm security system. Engine will be
stopped.
system turns to Armed
“N” (program neutral) icon shall appear on remote key display and StarLine app
main screen
system and vehicle are now ready for remote and automatic engine start.
If any door is open or ignition is switched On after setting to Program neutral, then
remote and automatic engine will be prohibited until Program neutral procedure is
executed again.
Vehicle equipped with automatic transmission must be switched to Parking position in
order to prepare it for remote or automatic engine start.
Engine start
Remote engine start can be activated by one of following ways:
tag button shortly push once (if enabled in system configuration)
long push level 1 of remote key button
3 x Lock command from factory remote control (if supported for particular vehicle
model and enabled in system configuration)
SMS-text command 21
voice call menu command 21
command from StarLine mobile app
command from starline.online personal account
Automatic engine start can be activated by following conditions:
• engine or interior temperature
• main vehicle battery voltage drop
32
To Next Page
Loading...
