sequence number of corresponding digit entered (1,2, 3 or 4 times).
12. Repeat 10...12 steps for remaining new code digits.
13. A new code entry will be confirmed with 2 LED flashes and 2 beep sounds.
14. Enter a new code once again repeating 10...12 steps.
15. New emergency disarm code recording will be confirmed with 2 LED flashes and 2
beep sounds.
Optional accessories
BT-6 wireless tag (transponder)
Short range 1-way remote control on a short distance 10-15 m approx
Radio operation range – 2.4 GHz Bluetooth Low Energy
Button for arming / disarming / switching operation mode / engine start /
stop
LED indicator
Buil-in accelerometer
Battery CR2032 3V
Waterproof shockproof casing
2-way LCD remote key
2-way radio remote control on a distance up to 2000 m
Radio operation range – 868 MHz
4 control buttons (see functions in instruction manual)
LCD display
Built-in buzzer and vibration drive
Battery LR43 (AAA) 1.5V
RFTM 868 external transceiver
External transceiver module for communication with optional 2-way remote
control key
Radio operation range – 868 MHz
Led indicator
Built-in service button
Wire with connector to plug into main unit service button input
MIC-6 external microphone
Remote listening of vehicle interior via voice call
EC-1 touch sensor
Capacitive sensor to perform Hands Free functionality by touching a door
handle when tag is in range and emergency disarm code entry in Beach
mode.
MS-06BT wireless sensor
Wireless magnetic sensor with reed switch to secure camper, van doors,
windows, roof racks etc.
Radio operation range – 2.4 GHz Bluetooth Low Energy
Built-in LED and button
Built-in accelerometer and temperature sensor
Battery CR2450 3V
52
To Next Page
Loading...
