Starr Instruments FDG Series - Technical Specifications; Device Specifications

3
1.4 Specifications
Accuracy
± 0.2% F.S.
Selectable Units
mN, N, gf, kgf, ozf, and lbf.(Selectable)
Display
160*128 dot matrix LCD with LED Backlight
Overload
150% of F.S. (LCD flashes beyond 110% of F.S.)
Temperature Effects
<0.03% FS per °C
Measurement Mode
Peak, Autopeak or Track Mode
Set Point
Tolerance Alarm
Sampling Rate
1000 Hz
Display Update
10 times/sec.
Memory
1000 data
Power
3.6VDC Ni-MH rechargeable batteries
Battery Life
Approximately 16 hours continuous use per full charge
Charger / Adaptor
Universal USB/BM charger, Input:110~240VAC
Outputs
USB, RS232, Set points output
Environment
Operating: -10 to 40°C, 20 to 80% RH
Storage : -20 to +50°C , 5 to 95%RH
Dimensions
145*73*35.5
Weight:
0.7 kg (1.5 lb)
Accessories
AC adapter/charger,6 attachments: hook, flat tip, conical tip,
chisel tip, notched tip, extension shaft
The capacity and resolution is in table on back cover.