To Next PageTo Next Page
Need help?Do you have a question about the StarTech.com STHDBTRX and is the answer not in the manual?
General| Brand | StarTech.com |
|---|---|
| Model | STHDBTRX |
| Category | Matrix Switcher |
| Language | English |
Identifies front panel buttons, LEDs, and sensors.
Details rear panel connectors like HDMI, RJ45, and power.
Shows receiver front panel LEDs and IR ports.
Details receiver rear panel ports including HDMI and RJ45.
Lists all items included in the box for both transmitter and receiver.
Specifies the hardware and software needed for system setup.
Steps for preparing the location and installing the matrix transmitter.
Instructions for connecting network cables and receiver units to displays.
How to select input sources using the device's physical buttons.
Operating the matrix switch using the included remote control.
Instructions for downloading and installing the RS232 control software.
Explains the software's message display area for monitoring and status.
Guide to configuring the device's IP address through the software.
How to set output ports to single or dual UTP transmission modes.
Instructions for typing and sending commands via the software interface.
Managing the serial connection state and selecting the correct COM port.
Using buttons to connect or disconnect the serial communication.
Remotely changing output device selections using the software interface.
How to select specific input sources for each output port.
Interpreting messages in the software's receive window for confirmation.
Specifies baud rate, data bits, parity, and stop bits for commands.
Lists specific codes for controlling input-to-output mapping.
Detailed hexadecimal codes for selecting specific inputs for each output.
Explains the format and meaning of status feedback messages.
Commands to retrieve status and reset the web interface password.
Guide to opening and logging into the device's web control panel.
How to change the input source for each video output port via the web interface.
Setting up IR input sources for remote control functionality.
Guide to installing and using software to discover device IP addresses.
Steps for assigning a static IP address to the device through the software.
Explanation of EDID and its role in display compatibility.
How to find common resolution and audio specs for all displays.
Details the functions of different EDID emulation settings.
Instructions for setting the device's DIP switches for desired EDID emulation.
Details the number of input/output ports and all physical connectors.
Lists device LEDs, maximum resolution, and CAT5 cable length.
Legal disclaimer concerning product liability and damages.
