Instruction manual
4
3. Do one of the following:
• Connect a keyboard and a mouse to the USB keyboard and mouse ports.
• If you’re using a combination wireless keyboard and mouse, connect the
wireless receiver to the keyboard port.
4. If necessary, do any of the following:
• Connect speakers to the console audio speaker port.
• Connect a microphone to the console mic port.
• Connect USB peripherals to the USB hub ports.
Connect a computer to the KVM switch
You can connect up to four computers to the KVM switch.
1. Turn o the computers that you want to connect to the KVM switch and any devices
or peripherals that are connected to the computers (for example, printers, external
hard drives, and so on).
2. Connect a DisplayPort video cable to the DisplayPort port on your computer and to
one of the PC DisplayPort ports on the KVM switch.
3. Connect a USB cable to the USB port on the computer and to the PC USB port on
the KVM switch
4. If you’re using audio, connect speakers and/or a microphone to the PC audio
speaker and mic ports on the KVM switch.
5. To connect additional computers, repeat steps 1 to 4.
6. If you want to share USB peripherals between connected computers or devices,
connect the peripherals to the USB hub ports on the KVM switch.
7. Connect the universal power adapter to a power source and to the power adapter
port on the KVM switch. The power LED should illuminate.
8. Turn on any devices or peripherals that are connected to the computer, and then
turn on the connected computer. Wait for the computer to nishing loading and
then test the functionality of the keyboard and mouse of the connected computer.
9. If additional computers are connected to the KVM switch, select a dierent port
and repeat step 8 until you have tested the functionality of all of the connected
computers.
To Next Page
Loading...
Need help?
General
