8
Notes about left or right side motors
The Volt gimbal motor assembly, casually referred to as the hockey stick, may be mounted to either
side of the gimbal yoke. In general, regular operators prefer to mount it to the left and goofy operators
mount it to the right. This allows maximum viewability of the monitor and places the gimbal button
conveniently near your thumb. However, broadcast users may wish to test t their zoom controller onto
the handle to ensure access to the gimbal button. Also, keep in mind your rest position may need to
change if the Volt gimbal motor assembly contacts your body.
RIGHT side mount
(typically goofy)
LEFT side mount
(typically regular)
Choosing sides
To Next Page
Loading...
