Stealth Cam STC-AD3 - Page 22

STC-AD3
www.stealthcam.net Toll Free 877-269-8490
22
4. Press Right button to select the year setting
5. Press Up/Down button to select the appropriate year
6. Press Right button to enter the time setting
7. Press Up/Down button to select the appropriate hour
8. Press Right button to select minute setting
9. Press Up/Down button to select the appropriate minute
10. Press Right button to select the second setting
11. Press Up/Down button to select the appropriate second
At the end of time setting, press OK to confirm the date/time setting
and exit the setting menu.
NOTE: If you press Menu before pressing the OK button, you will exit
the setting menu without confirm the date time setting
Set the Capturing sequence. The Stealth Cam STC-AD3 can be
programmed to shoot 1-3 pictures per triggering or 10 seconds of
video.