STC-AD3
www.stealthcam.net Toll Free 877-269-8490
38
Software installation
• Unplug the USB cable from PC.
• Insert the CDROM in CD driver of your PC.
• The auto-run program will execute.
• Follow the instructions shown on screen from your PC to
completely install the driver and application program.
• Restart windows.
• Successful installation will create “Lover’s Eye” photo imaging
icon on you desktop.
• Connect your camera to the PC using the USB cable provided,
the PC will recognize the new device and set UP the
configuration of the PC automatically.
• NOTE: Users of Windows 98SE or earlier must install
camera driver prior to connecting the USB cable.
To Next Page
Loading...
