STC-AD3
Using manual shoot option for AVI mode
• Slide the power toggle switch to TEST position. Wait for 2
beeps.
• Once you hear the 2
nd
beep press the MENU button. The
Camera icon will flash.
• Press RIGHT button to select manual Movie capture mode.
Movie icon will show on LCD screen to indicate AVI mode.
• Press OK to confirm setting and the icon will freeze.
• Press MENU to exit setting.
• You may now point the camera in the direction where you want
to capture the video and press SHUTTER button to start the
video recording.
• Press the SHUTTER button the 2
nd
time to stop video recording.
(Note: if you forget to press the SHUTTER button the 2
nd
time to stop video recording, it will record the video
indefinitely until the memory capacity is full or until you
power off the camera.)
www.stealthcam.net Toll Free 877-269-8490
33
To Next Page
Loading...
Need help?
General
