STC-AD3
www.stealthcam.net Toll Free 877-269-8490
32
Manual shooting mode
Using manual shoot option for Camera mode
• Slide the power toggle switch to TEST position. Wait for 2
beeps. Picture icon will show as default on LCD screen to
indicate Camera mode.
• Once you hear the 2
nd
beep, you may point the camera in the
direction where you want to capture the image and press
SHUTTER button once. You will hear two fast beeps after you
press the SHUTTER button. This indicates the image has
been captured and the LCD counter on the front of the housing
will update the number of images in memory.
• When taking night time pictures allow approximately 7 seconds
between shots to allow the flash to charge. In case of low
battery power, it will take longer to charge the flash between
pictures.
To Next Page
Loading...
Need help?
General
