STC-AD3
www.stealthcam.net Toll Free 877-269-8490
35
memory will display on the center bottom of the screen.
• Once you have selected the image you wish to view, press the
UP button. This will magnify the image on the screen.
• Using LEFT/RIGHT/UP/DOWN button, you can move the
image to display different area of the image.
• To return to the image selection view from the magnified image
screen press the OK button.
Viewing the images on your home TV equipped with an RCA input
jack. (Cable included)
• Attach the appropriate cable to the video out jack on the
camera. Insert the other end into the RCA video in jack on the
TV. Turn on the TV and slide the camera power toggle switch to
TEST. Wait for Camera image to show up on monitor. Make
sure to switch to VIDEO IN mode on your TV. (See your TV
owner’s manual for directions.
• Press the OK button on the camera. This will display the last
image captured.
To Next Page
Loading...
Need help?
General
