WARNING!
Risk of injury through insucient qualicaon!
Insucient experience or skills for handling the required tools and
insucient knowledge of regional or normave regulaons for the
required work can lead to severe injuries or material damage.
-
Assign all work whose risks you cannot esmate due to
insucient personal experience to a qualied expert.
Additional safety instructions for chargers
Use and handling of the charger
- Only connect the charger if the mains voltage of the socket matches that on the type
plate.
- Only connect the charger to an easily accessible socket so that you can quickly
disconnect it in the case of a fault.
- Always ensure sucient venlaon while charging the rechargeable baery. Gases
might be released.
- Only use the charger to recharge rechargeable baeries approved by the
manufacturer.
- Do not recharge non-rechargeable baeries.
- A cracked or otherwise damaged rechargeable baery must not be connected to the
charger.
- Protect the charger from any kind of moisture.
- Only use the charger indoors. Never operate it in damp rooms or in the rain.
- Never use the charger in environments with explosive or ammable materials. Risk
of re and explosion.
- Do not place any objects on the charger and do not cover the charger.
- Do not install the charger close to a heat source.
- Regularly check the charger for damage.
- Do not use a damaged charger unl it has been repaired.
- Do not take the charger apart. Repairs must only be carried out through a licensed
technical customer service.
- Do not use the charger if it has been subjected to blows or knocks or if it was
dropped.
- Disconnect the charger from the mains aer each use.
- Disconnect the charger from the mains before cleaning, servicing, storing and
transporng it and let it cool down completely.
32