Steinbach Poolrunner Battery Basic - Storage

1. Open all clips
12
.
2. Take the top part
1
o.
3. Remove the lter unit
2
.
4. Thoroughly rinse the lter unit with plain
tap water.
5. Rinse the device aer each use with plain
tap water inside and out.
The device is clean.
Storage
1. Thoroughly clean the device (see secon "Cleaning").
2. Let all parts dry completely.
3. Fully charge the device.
Recharging is required aer at latest 3 months due to self-discharge.
4. Then store the device and its accessories in a dry and frost-free place (≥ +5 °C)
without direct sunlight.
13
1
12
14
2
15
41