Steinbach Poolrunner Battery Basic - Attaching the Sail; Adjusting the Wheels

1. Guide the end of the nylon cord of the
oang handle
5
through the eyelet
on the handle
8
.
2. Shorten the nylon cord to a length that
roughly corresponds to the depth of
your pool and e it in a knot.
The oang handle is aached.
Attaching the sail
1. Aach the sail
4
on the side of the
water discharge nozzle
9
.
The sail is installed.
Adjusting the wheels
You can adapt the working radius by adjusng the wheels.
We recommend the following sengs:
C-A
(Seng for most pools (standard seng)
2
8
5
3
4
9
4
35