Steinbach Poolrunner Battery Basic - Attaching the Cleaning Strips

B-C
(Seng for large pools)
B-A
(Seng for small pools)
1. Press the retaining lugs away from the half axle and pull o the wheel.
2. Insert in the wheel with the catch so that it snaps into place at the respecve leer
for the selected seng.
The wheels are set.
Attaching the cleaning strips
1. Insert the cleaning strips
15
into the
sucon channels on the boom of the
boom part
3
.
2. Make sure that the cleaning strips
15
have properly engaged and have a ght
t.
The cleaning strips are aached.
5
6
Only aach the cleaning strips if they can assist cleaning (e.g. for removing a biolm). In
the case of an inclinaon, unevenness, too much dirt on the oor or cold water
temperature, the cleaning strips might have an adverse eect on the cleaning result.
7
3
15
36