Steinbach Poolrunner Battery Basic - Basic Settings; Charging the Rechargeable Battery; Attaching the Floating Handle

The sail
4
lets the pool cleaner turn automacally as soon as it touches the pool wall.
The posions of the wheels
10
inuence the travel path of the pool cleaner.
The removable lter unit
2
lters the water and collects deposits in the pool.
The oponal cleaning strips
15
can improve the cleaning result depending on the degree
of soiling.
When the rechargeable baery is drained, the pool cleaner stops cleaning.
Basic settings
Charging the rechargeable battery
WARNING!
Risk of re!
Charging at a temperature below 10 °C leads to chemical damage to
the cell and can cause a re.
- Charge the rechargeable baery at room temperature.
NOTICE!
The sail might become damaged if the device is stored on its head.
-
Never set down the device on its head.
1. Switch o the device before charging.
2. Connect the charger to the device.
3. Plug the charger into a socket.
The charge control indicator is lit red.
The rechargeable baery is charging.
4. When the charge control indicator is lit
green, disconnect the charger from the
power supply and the device.
The rechargeable baery is charged.
Attaching the floating handle
Aach the oang handle so you can place the device in the pool and take it out of the
pool in a controlled manner.
1
34