Steinberg UR-RT2 - Page 10

Software
UR-RT4 / UR-RT2 Operation Manual 10
How to Select the Sample Rate (Mac)
You can select the sample rate in [Audio MIDI Setup]
window.
1. Select [Applications]  [Utilities]  [Audio
MIDI Setup].
2. Select the sample rate from the [Format] menu.
How to Select the Buffer Size (Mac)
You can select the buffer size in the settings window for
each application (DAW software, etc.).
1. From the Cubase series menu, select [Studio]
 [Studio Setup].
NOTE
The method for opening the settings window is different
for each application.
2. Click [Control Panel] in [Steinberg UR-RT] in
the menu on the left side of the window.