Steinberg UR-RT2 - Technical Specifications

Appendix
UR-RT4 / UR-RT2 Operation Manual 48
Technical Specifications
UR-RT4
*[TRANSFORMER]switchOFF
MIC INPUT 1-4 (balanced)*
Frequency Response +0.1/-0.3 dB, 20 Hz to 22 kHz
Dynamic Range 101 dB, A-Weighted
THD+N 0.0035 %, 1 kHz, -3 dBFS, 22 Hz/22 kHz BPF
Maximum Input Level +4 dBu
Input Impedance 4 kΩ
Gain Range +6 dB − +60 dB
HI-Z INPUT 1/2 (unbalanced)
Maximum Input Level +8.5 dBV
Input Impedance 1 MΩ
Gain Range -0.7 dB − +53.3 dB
LINE INPUT 3/4 (balanced)
Maximum Input Level +24 dBu
Input Impedance 20 kΩ
Gain Range -14 dB − +40 dB
LINE INPUT 5/6 (balanced/unbalanced)
Frequency Response +0.1/-0.1 dB, 20 Hz to 22 kHz
Dynamic Range 102 dB, A-Weighted
THD+N 0.0025 %, 1 kHz, -3 dBFS, 22 Hz/22 kHz BPF
Maximum Input Level +22 dBu (+4 dBu input), +2.1 dBV (-10 dBV input)
Input Impedance 30 kΩ (+4 dBu input) / 20 kΩ (-10 dBV input)
Gain Selection +4 dBu or -10 dBV input Switchable
LINE OUTPUT 1-4 (balanced/unbalanced)
Frequency Response +0.1/-0.1 dB, 20 Hz to 22 kHz
Dynamic Range 114 dB, A-Weighted
THD+N 0.0015 %, 1 kHz, -3 dBFS, 22 Hz/22 kHz BPF
Maximum Output Level +16 dBu
Output Impedance 75 Ω
MAIN OUTPUT (balanced/unbalanced)
Frequency Response +0.1/-0.1 dB, 20 Hz to 22 kHz
Dynamic Range 114 dB, A-Weighted
THD+N 0.0015 %, 1 kHz, -3 dBFS, 22 Hz/22 kHz BPF
Maximum Output Level +16 dBu
Output Impedance 75 Ω
PHONES 1/2
Maximum Output Level 100 mW+ 100 mW, 40 Ω
USB
Specification USB2.0, 24-bit, 44.1 kHz/48 kHz/88.2 kHz/96 kHz/176.4 kHz/192 kHz
XLR INPUT
Polarity 1: Ground,
2: Hot (+),
3: Cold (-)