Steinberg UR-RT2 - Page 13

Software
UR-RT4 / UR-RT2 Operation Manual 13
DAW Area
This is the area for configuring the DAW channel settings.
1 Level Meter
Indicates the signal level.
2 Pan
Adjusts the pan.
Range: L16
− C − R16
3 Mute
Turns the mute function on (lit) and off (unlit).
4 Solo
Turns the solo function on (lit) and off (unlit).
5 Fader
Adjusts the signal level.
Range: - ∞ dB
− +6.00 dB
Master Area
This is the area for configuring the master channel
settings.
1 Level Meter
Indicates the signal level.
2 REV-X Send On
Indicates that REV-X Send is on. This is normally set to on.
3 REV-X Edit
Opens (lit) and closes (unlit) the “REV-X” (page 21) setup
window.
4 REV-X Type
Selects the REV-X type.
Options: Hall, Room, Plate
5 REV-X Time
Adjusts the reverb time of REV-X. This parameter links to
Room Size. The adjustable range varies depending on
REV-X type.
6 REV-X Return Level
Adjusts the return level of REV-X.
Range: - ∞ dB
− +6.00 dB
7 Pan
Adjusts the pan position
Range: L16
− C − R16
8 Mute
Turn the mute function on (lit)/ off (unlit).
1
2
3
4
5
REV-X Type Range
Hall 0.103 sec − 31.0 sec
Room 0.152 sec − 45.3 sec
Plate 0.176 sec − 52.0 sec
1
2
4
8
5
9
7
6
3