Steinberg UR22C - Page 10

Software
UR22C Operation Manual 10
DAW Area
This is the area for configuring the DAW channel settings.
1 Level Meter
Indicates the signal level.
REV-X Area
This is the area for configuring the REV-X channel settings.
1 REV-X Edit
Opens (lit) and closes (unlit) the “REV-X” (page 18) setup
window.
2 REV-X Type
Selects the REV-X type.
Settings: Hall, Room, Plate
3 REV-X Time
Adjusts the reverb time of REV-X. This parameter links to
Room Size. The adjustable range varies depending on
REV-X type.
4 REV-X Time Value
Displays and adjusts the REV-X Time value. Enable
editing of the value by double clicking the number.
5 REV-X Return
Adjusts the return level of REV-X.
6 REV-X Return Value
Displays and adjusts the REV-X Return value. Enable
editing of the value by double clicking the number.
1
REV-X Type Range
Hall 0.103 sec − 31.0 sec
Room 0.152 sec − 45.3 sec
Plate 0.176 sec − 52.0 sec
1
2
3
4
5
6