Panel Controls and Terminals
UR22C Operation Manual 4
) [MIX] knob
Adjusts the signal level balance between the input signal
to the [MIC/LINE 1/2] jacks and the signal from an
application, such as DAW software. Operation of this
control knob does not affect the signal sent to a computer.
! [PHONES ] jack
For connection to a set of stereo headphones.
@ [PHONES] knob
Adjusts the output signal level of the [PHONES] jack.
# [OUTPUT] knob
Adjusts the output signal level of the [MAIN OUTPUT]
jacks.
$ POWER indicator
Lights up when the power is turned on. The indicator
flashes continuously if the power supply is insufficient. In
this case, use the USB power adapter or USB mobile
battery.
Using the Mix knob
Turn the [MIX] knob to the [DAW] side if the input
volume is high and to the [INPUT] side if the input
volume is low. When the knob is turned fully to the
[DAW] side, only the input sound from DAW can be
heard.
To Next Page
Loading...
