Usage Examples
UR28M Operation Manual 32
7. Tap to show the details window and set
the input bus for the track by tapping a
number.
8. Tap to turn monitoring on (lit).
9. Adjust the input signal level of the
microphone with the [INPUT GAIN] knob on
the device.
To achieve optimum recording levels, increase the
input level with the [INPUT GAIN] knob until the
[PEAK] indicator lights in red, then slowly bring the
level down until the indicator lights slightly when the
input level is maximum.
10. While singing into the microphone, adjust
the output signal level of the headphones by
the [PHONES] knob on the device.
11. Tap [I] to start the recording.
12. Tap [] to stop the recording.
13. Tap and slide on the ruler to move the
playback position.
You can also tap to return to the beginning of the
recording.
14. Tap [>] to playback the recorded sound.
dspMixFx for iPad
From your iPad, you conveniently control built-in
DSP mixer functions and DSP effects by using
dspMixFx for iPad.
For details on dspMixFx for iPad, see the
Steinberg web site below.
http://www.steinberg.net/
To Next Page
Loading...
