Page 24 | Stellar
®
Large OTR Service Crane Owner’s Manual
Manual Operation
If the remote control
malfunctions, follow these steps
to operate the crane manually:
1. Switch to manual operation.
Toggle the Remote/Manual
switch to the ‘Manual’ position.
2. Operate Levers. Using the
levers on the crane control
center at the crane base,
return the crane to the stowed
position. See the operation
chapter for details on stowing
the crane.
3. Shut off crane controls.
5. Have the unit serviced
immediately to restore remote
control functionality.
To Next Page
Loading...