80
650/800/850 GUEPARD
ENGINE OIL REPLACEMENT
● Unscrew the oil feeler gage and wipe it with
a clean cloth.
● Insert the oil feeler gage in the oil filler cap
to a stop and remove it again to check the
oil level. The oil level should be between
the minimum and maximum marks.
1. Maximum level
2. Minimum level
● If the oil level is under the minimum level, fill
it up to the recommended amount.
● Insert the oil feeler gage in the oil filler cap
and screw it.
__________________________
Make sure that the engine oil level corresponds
to the recommended level. Otherwise, the engine
may be severely damaged.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
To replace the engine oil (with or without oil filter
replacement):
1. Park the vehicle on a flat horizontal surface.
2. Unscrew the oil feeler gage to drain oil from the
engine crankcase.
3. Insert the drain pump tube into the oil filler cap
and drain oil from the engine crankcase.
4. Remove the side panel (when replacing the filter)
1. Oil filter cover
manufacture website : stelsoffroad.com
To Next Page
Loading...
