Daily cleaning and maintenance
31.10.2002 \\Docuserver\ba\Master\Ba_eng\UM\044_60\UM_A+S\Tglrein.fm 17
VCM 44
6.2 Maintenance work for 8 hour operation Maintenance work
When? Where? What to check... ...and what to do. Page
Daily Shaft seals of the bowl/motor Sight control of leakage once
daily and after every cleaning
24
Bowl and lid Seals and running sleeves in the bowl replace damaged seals
clean running sleeves and re-
place them if wear is noticeable
on the upper surface.
24
working in-
serts
working inserts must be sharp and un-
damaged, if not,
they should be replaced.
Blades should be sharpened.
(See ” Sharpening the blades”
on page 24.)
19
To Next Page
Loading...