Operating the machine
31.10.2002 \\Docuserver\ba\Master\Ba_eng\UM\044_60\UM_A+S\Bedien.fm 13
VCM 44
5. Operating the machine
5.1 Working insert fitting
5.2 Loading the machine.
5.3 The electronic timer SX 200
The built in timer is a microprocessor based digital timer housed in a standard DIN style case
with a 72 mm (2.83 inch) square front bezel and a .3 inch high LED display.
The programmable features of the timer include eight time ranges and eight output operating
modes. These operating modes, and all other set-up functions are programmed with miniature
rocker switches located on the back of the housing.
Caution! Danger of injury when handling sharp blades and working inserts.
What should happen What to do Key The result!
Open container Unlock toggle seal
Open lid.
Lid is open
Working inserts fitting Pull the tool carefully over the motor
shaft and turn clockwise to secure it.
Remounting is done vice-versa.
working inserts are ready for use.
The VCM 44 requires headroom for perfect product processing, i.e., the bowl must
not be filled beyond 3/4 capacity.
What should happen What to do Key The result!
Manual loading Unlock toggle seals
Open lid.
Lid is open
Put in product.
Close container Close the lid and lock the toggle seal.
The machine is ready to process.
Manual measuring via opened
sight glass.
Open sight glass. Fill in ingredients
To Next Page
Loading...