Steris LED202 - Page 26

10 — Appendix
23
11042437_A
LED202 In-Ceiling Lighting System Operator Manual
The STERIS Corporation LED202 SYSTEM, models LED202X2 and LED202X1 is intended for use in the
electromagnetic environment specified below. The customer or the user of the STERIS Corporation LED202
SYSTEM, models LED202X2 and LED202X1 should assure that it is used in such an environment.
Emissions test
Compliance Electromagnetic environment – guidance
RF emissions CISPR 11 Group 1
The STERIS Corporation LED202 SYSTEM, models
LED202X2 and LED202X1 uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
RF emissions CISPR 11
Class A The STERIS Corporation LED202 SYSTEM, models
LED202X2 and LED202X1 is suitable for use in all
establishments other than domestic, and may be used
in domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes, provided the following warning is heeded:
WARNING
PERSONAL INJURY AND/OR EQUIPMENT
DAMAGE HAZARD
This equipment/system is intended for
use by healthcare professionals only.
This equipment/system may cause
radio interference or may disrupt the
operation of nearby equipment. It may
be necessary to take mitigation
measures, such as re-orienting or
relocating the STERIS Corporation
LED202 SYSTEM, models LED202X2
and LED202X1 or shielding the
location.
Harmonic emissions IEC
61000-3-2
Class A
Voltage
fluctuations/flicker
emissions IEC 61000-3-
3
Complies