10 — Appendix
26
Operator Manual LED202 In-Ceiling Lighting System
11042437_A
Guidance and Manufacturer’s Declaration – Electromagnetic Immunity
The STERIS Corporation LED202 SYSTEM, models LED202X2 and LED202X1 is intended for use in the electromagnetic
environment specified below. The customer or the user of the STERIS Corporation LED202 SYSTEM, models LED202X2
and LED202X1 should assure that it is used in such an environment.
Immunity Test
IEC 60601 Test Level
Compliance Level
Electromagnetic
Environment – Guidance
IMMUNITY to
proximity fields
from RF
wireless
communica-
tions
equipment
MHz
Modula-
tion
Field
Strength
MHz
Modula-
tion
Field
Strength
Portable and mobile RF
communications equipment
should be used no closer to
any part of the STERIS
Corporation LED202
SYSTEM, models
LED202X2 and LED202X1,
including cables, than the
recommended separation
distance calculated from
the equation applicable to
the frequency of the
transmitter.
Recommended separation
distance:
E = [6/d] √P
d= [6/E] √P
where P is the maximum
output power rating of the
transmitter in watts (W)
according to the
transmitter manufacturer,
d is the recommended
separation distance in
meters (m), and E is the
field strength in V/m. Field
strengths from fixed RF
transmitters, as
determined by an
electromagnetic site
survey, should be less than
the compliance level in
each frequency range.
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
385
450
710
745
780
810
870
930
1720
1845
1970
2450
5240
5500
5785
0.1342
13.56
0.030
18 Hz
18 Hz
217 Hz
217 Hz
217 Hz
18 Hz
18 Hz
18 Hz
217 Hz
217 Hz
217 Hz
217 Hz
217 Hz
217 Hz
217 Hz
2.1 kHz
50 kHz
CW
27 V/m
28 V/m
9 V/m
9 V/m
9 V/m
28 V/m
28 V/m
28 V/m
28 V/m
28 V/m
28 V/m
28 V/m
9 V/m
9 V/m
9 V/m
65 A/m
7.5 A/m
8 A/m
385
450
710
745
780
810
870
930
1720
1845
1970
2450
5240
5500
5785
0.1342
13.56
0.030
18 Hz
18 Hz
217 Hz
217 Hz
217 Hz
18 Hz
18 Hz
18 Hz
217 Hz
217 Hz
217 Hz
217 Hz
217 Hz
217 Hz
217 Hz
2.1 kHz
50 kHz
CW
27 V/m
28 V/m
9 V/m
9 V/m
9 V/m
28 V/m
28 V/m
28 V/m
28 V/m
28 V/m
28 V/m
28 V/m
9 V/m
9 V/m
9 V/m
65 A/m
7.5 A/m
8 A/m
NOTE: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
To Next Page
Loading...