STIEBEL ELTRON WPL E Series Operation And Installation Manual

WWW.STIEBEL-ELTRON.COM WPL E | WPL COOL| 7
INSTALLATION
SAFETY
INSTALLATION
7. Safety
Only a qualified contractor should carry out installation, commis-
sioning, maintenance and repair of the appliance.
7.1 General safety instructions
We guarantee trouble-free operation and operational reliability
only if the original accessories and spare parts intended for the
appliance are used.
7.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
8. Appliance description
For external installation the appliance offers additional frost pro-
tection of the heating water pipes. The integral frost protection
circuit starts the heating circuit pump in the heat pump circuit
automatically at +8°C condenser temperature, and thereby en-
sures circulation in all water-filled sections.
The heat pump is started automatically when the temperature in
the heat pump circuit drops below +5°C.
8.1 Standard delivery
The casing components for the appliance are delivered in a sepa-
rate pack.
8.1.1 Standard appliance
- Type plate
8.1.2 Casing components – external installation
- Hood – external installation
- Front panel
- Back panel
- Pipe bend for heating circuit flow
- Pipe bend for heating circuit return
8.1.3 Casing components – internal installation
- Hood – external installation
- Front panel
- Back panel
- Pipe bend for heating circuit return
8.2 Required accessories
8.2.1 Required accessories for external installation
- Heat pump manager WPMII
- Accessories – external installation
- Pressure hoses SD25 or SD32
8.2.2 Required accessories for internal installation
- Heat pump manager WPMII
- Accessories – internal installation
- Pressure hoses SD25 or SD32
8.3 Further accessories
8.3.1 Further accessories for external installation
- Remote control for heating systems FE7
- Remote control for heating systems FEK
- Water softener fitting HZEA
8.3.2 Further accessories for internal installation
- Air hose DN 560 x 3 m
- Air hose DN 560 x 4 m
- Hose connection plate 560
- Wall outlet AWG 560 H
- Wall outlet AWG 560 V
- Wall outlet AWG 560 L
- Wall outlet AWG 600 L
- Remote control for heating systems FE7
- Remote control for heating systems FEK
- Condensate pump PK 10
- Water softener fitting HZEA

STIEBEL ELTRON WPL E Series Specifications

General

Brand	STIEBEL ELTRON
Model	WPL E Series
Category	Heat Pump
Language	English