Stihl BT 360 User Manual

16
English
BT 360
If the auger jams in the hole –
shut off the engine immediately:
: Move the stop switch to STOP
: Pull the interlock lever (1) to the left
to block the gearbox.
: Rotate the whole machine
counterclockwise to unwind the
auger from the ground.
The interlock lever is designed to
disengage automatically if a given
maximum unwinding torque is
exceeded. This reduces the risk of
damaging the drilling gear.
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power:
: Pull out the choke knob (1).
: Loosen the twist lock (2) on the filter
cover.
: Remove the filter cover (3).
: Clean away loose dirt from around
the filter and inside the filter cover.
: Inspect the main filter (4) – if it is
dirty or damaged, unscrew the end
cover (5) with wingnut.
: Remove and replace the main filter.
Always install a new auxiliary filter
together with the new main filter.
Releasing a Trapped Auger
441BA023 KN
1
Cleaning the Air Filter
2
1
3
441BA024 KN
5
441BA025 KN
4

Stihl BT 360 Specifications

General

Engine Type	2-stroke
Drill Speed	200 rpm
Sound Power Level	107 dB(A)
Displacement	60.3 cc
Power Output	3.9 kW