27BT 360
English
Augers
Diameters
90 to 350 mm
Drilling depth
to approx. 3 m, depending on auger
diameter and soil conditions
Special Accessory
Shaft extension
500 and 1000 mm long
Users of this machine may only carry
out the maintenance and service work
described in this user manual.
All other repairs must be carried out
by a servicing dealer.
STIHL recommends that all
maintenance and repair work be carried
out by an authorized STIHL dealer.
STIHL dealers regularly attend training
courses and are supplied with the
necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool
or are technically equivalent. Only use
high-quality replacement parts in order
to avoid the risk of accidents or damage
to the machine.
STIHL recommends the use of genuine
STIHL replacement parts.
Original STlHL parts can be identified by
the STIHL part number, the
STIHl
logo and the STlHL parts symbol (.
The symbol may appear alone on small
parts.
Andreas Stihl AG & Co. KG
Badstr. 115
71336 Waiblingen
certify that the new machine described
below
conforms to the specifications of
Directives 98/37/EC and 89/336/EEC.
The product has been developed and
manufactured in compliance with the
following standards:
EN 292, EN 55012, EN 61000-6-1
Waiblingen, 01/09/2003
Andreas Stihl AG & Co. KG
Steinhauser
Director
Group Product Management
Engineering Services
Maintenance and Repairs
Category: Earth Auger
Make: STIHL
Model: BT 360
Serial identification: 4308
Certificate of Conformity
To Next Page
Loading...
Need help?
General
