FS 120, FS 120 R, FS 200, FS 250, FS 250 R
English
30
The type and style of the harness
depend on the market.
The use of the shoulder strap is
described in the chapter on "Approved
Combinations of Cutting Attachment,
Deflector, Handle and Harness".
Shoulder strap
N Put on the shoulder strap (1).
N Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
N Balance the brushcutter.
Full harness
N Put on the full harness (1).
N Adjust the length of the strap so that
the spring hook (2) is about a hand’s
width below your right hip.
N Balance the trimmer/brushcutter.
Connect machine to harness
The type and version of the harness and
snap hook depend on the market.
N Hook the snap hook (1) into the
carrying ring (2) on the shaft
Fitting the Harness
Balancing the
Trimmer/Brushcutter
To Next Page
Loading...
