0458-507-0121-A
19
English
8 Mixing Fuel and Refueling the Brushcutter
► Connect the carrying ring (2) to the carabiner (1).
► Wait for the trimmer to stop swinging.
Check position of cutting attachment. If it needs adjustment:
► Loosen the screw (3).
► Move carrying ring (2) up or down the drive tube until
correct balanced position is reached.
► Tighten down the screw (3) firmly.
7.3 Adjusting the Bike Handle
The bike handle can be set to different positions to suit the
height and reach of the user.
► Shut off the engine.
► Loosen the screws (1).
► Swing the bike handle (2) to the required position.
► Tighten down the screws (1) firmly.
8.1 Mixing Fuel
This trimmer requires a fuel mixture of gasoline and two-
stroke engine oil., in a ratio of 50:1.
STIHL recommends you use STIHL MotoMix.
If you mix the fuel yourself, use only STIHL two-stroke
engine oil or another high-performance engine oil in
accordance with JASO FB, JASO FC, JASO FD, ISO-L-
EGB, ISO-L-EGC or ISO-L-EGD.
STIHL specifies STIHL HP Ultra two-stroke engine oil or an
equivalent high-performance engine oil in order to maintain
emission limits over the machine’s service life.
2
3
0000-GXX-7809-A0
8 Mixing Fuel and Refueling the
Brushcutter
A video is available for this chapter
www.stihl.com/sxpweh
To Next Page
Loading...
Need help?
General
