Stihl FS 460 C User Manual

Technical Information 40.2010 Page 13
TI_40_2010_13_01_02.fm
5. Cutting attachments
Observe the permissible combinations of cutting
attachments, deflectors, limit stops and harnesses,
which vary depending on the version. Observe the
additional information in the Instruction Manual
5.1 Versions with standard drive tube and
long drive tube, see b 4.4
5.1.1 Mowing heads and deflector
Full harness must be used.
5.1.2 Grass cutting blades, brush knives and
deflector
Full harness must be used.
5.1.3 Shredder blade and deflector
Full harness must be used.
Designation Part number
1 Mowing head
STIHL SuperCut 40-2 4003 710 2140
2 Mowing head
STIHL AutoCut 40-2 4003 710 2125
3 Mowing head
STIHL AutoCut 40-4 4005 710 2100
4 Mowing head
STIHL TrimCut 41-2 4003 710 2104
5 Mowing head
STIHL PolyCut 41-3 4003 710 2113
6 Deflector only for mowing
heads 4147 710 8100
4
1
5
6
3
2
5903TI003 KN
Designation Part number
7 Grass cutting blade 230-4 4000 713 3801
8 Grass cutting blade 255-8 4000 713 3802
9 Grass cutting blade 250-40
Spezial 4000 713 3806
10 Brush knife 305-2 Spezial 4000 713 4103
11 Brush knife 300-3 4119 713 4100
12 Deflector for grass cutting
blades and brush knives 4147 710 8101
Designation Part number
13 Shredder blade 270-2 4000 713 3903
14 Deflector for shredder
blade 4147 710 8102
9
11
10
7
8
12
5903TI004 KN
13
14
5903TI005 KN

Stihl FS 460 C Specifications

General

Brand	Stihl
Model	FS 460 C
Category	Saw
Language	English