Stihl FS 510 C-M - Mounting the Bike Handle

FS 510 C-M, FS 560 C-M
English
13
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
For safety reasons only the cutting
attachments and deflectors or limit stops
shown in each row of the table may be
used together. No other combinations
are permitted because of the risk of
accidents.
Cutting Attachments
Mowing heads
1 STIHL AutoCut 40-4
2 STIHL TrimCut 51-2
3 STIHL PolyCut 41-3
Metal cutting attachments
4 Grass cutting blade 255-8
5 Grass cutting blade 250-40 Spezial
6 Brush knife 305-2 Spezial
7 Brush knife 350-3
8 Shredder blade 320-2
9 Scratcher tooth circular saw blade
225
10 Chisel tooth circular saw blade 225
11 Carbide tipped circular saw blade
225
Non-metal grass cutting blades, brush
knives, shredder blades and circular
saw blades are not approved.
Deflectors, Limit Stops
Deflectors
12 Deflector for mowing heads only
13 Deflector for metal mowing
attachments, items 4 to 7
14 Deflector for shredder blade
Limit stops
15 Limit stop for circular saw blades
225
Harnesses
16 Full harness must be used
Mounting Bike Handle with Swiveling
Handle Support
Do not rotate the control handle (1)
between unpacking and mounting it on
the handlebar; see also chapter on
"Adjusting the Throttle Cable".
The brushcutter is available with two
different handlebars:
2 Handlebar for machines used
primarily for mowing, brushcutting
and shredding, but also for
occasional sawing.
Mounting the Bike Handle
1
3BA003 KN
3BA004 KN
4
2