Stihl HSE 61

36 HSE 61, HSE 71, HSE 81
: Take the rear switch lever (1) out
of the housing.
: Disconnect the cable (1) from the
rear switch lever (2).
1
1
2
: Pull the cable (1) out of the slot in
the support.
: Disconnect both wires (2) and (3)
from the terminal block.
1
1
2
3
: Pull the support (1) out of the
sliding components in the
direction of the arrow.
: Pull the sliding components (1)
and (2) off the switch rod (3).
1
1
2
3