EasyManuals Logo

Stihl HT 135 User Manual

Stihl HT 135
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
HT 105, HT 134, HT 135
English
34
N Replace the guide bar.
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the bar rails.
Filters have an average life of more than
a year. Do not remove the filter cover or
replace the air filter as long as there is no
noticeable loss of power.
If there is a noticeable loss of engine
power
N Turn the choke knob to g.
N Loosen the screws (1).
N Remove the filter cover (2).
N Clean away loose dirt from around
the filter.
N Remove the filter element (3).
N Replace dirty or damaged filter
element (3).
N Replace any damaged parts.
Installing the Filter Element
N Install the filter element (3) in the
filter housing and fit the cover.
N Insert the screws (1) and tighten
them down firmly.
Exhaust emissions are controlled by the
design of the engine and components
(e.g. carburation, ignition, timing and
valve or port timing).
Replacing the Air Filter
1
1
0000-GXX-0482-A0
2
3
4
Engine Management

Table of Contents

Other manuals for Stihl HT 135

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl HT 135 and is the answer not in the manual?

Stihl HT 135 Specifications

General IconGeneral
Displacement36.3 cc
Bar Length30 cm
Power SourceGasoline
Weight7.9 kg
Fuel Capacity0.53 L (17.9 oz.)
Overall Length270 cm (106.3 in)

Related product manuals